Kangertech DRIPEZ Complete kit 80w

Kangertech DRIP EZ Kit

Kangertech Dripez is here to introduce a very unique product named the DRIP EZ Kit. The DRIP EZ features a e-liquid pump which is placed on top of the included bottle. A tube connects directly from the pump to the DRIP EZ RBA which allows e-Liquid to be delivered directly into your cotton. The concept is very similar to the “squonker” style kits such as the Dripbox. One difference is that the DRIP EZ mod may be used with any other 510 threaded tank. The DRIP EZ mod features a variable wattage output from 5 to 80 watts and also supports Nickel 200, Titanium and Stainless Steel wire in temperature control mode. The DRIP EZ mod requires (1) 18650 high amp battery and features a Micro USB charging port.

E-liquid is simply refilled using the e-liquid pump to saturate your cotton and is now ready to be vaped for massive flavor. The DRIP EZ RBA features a screwless two post deck for easier and improved builds. You may press down on the posts to release and change your coils. No need to hassle yourself with screws anymore due to this screwless design. The DRIP EZ supports replaceable 0.2ohm cotton kanthal drip coils which are easily replaced or can be rebuilt to your own personal preferences.

Pre-built coils and replacement build decks can be found here:
Replacement Drip Coils

Features and Specs:

• Dimensions: 5″ x 2-1/4″ x 1-3/16″ (Including Drip EZ RBA)
• Includes the Drip EZ RBA and Drip EZ Mod
• 22mm Diameter
• 510 Threaded
• Unique Juice Pump Delivery System
• Replaceable Bottle
• Temperature Control
• Variable Wattage Output: 5.0 – 80.0W
• Temperature Control : Ni200 / Ti / SS
• Temperature Control Range: 100 – 315C / 200 – 600F
• Resistance Range: 0.1 – 2.5ohm
• Two Post Deck
• Unique Screwless Clamp Post Design
• Press Down on Posts to Change Coils
• Use Pre-built Kanthal 0.2ohm drip coils or build your own
• Adjustable Airflow
• Zinc Alloy Construction
• Requires (1) 18650 High Amp Battery (Sold Separately)
• Micro USB Charging Port
• Low Resistance Protection
• Low Battery Warning Indicator
• High Temperature Protection

Please note: Temperature control requires the use of nickel, titanium, stainless wire.

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.

This device will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.

NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.

This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A or higher. Using other batteries can be potentially hazardous.

Warning: This tank uses sub-ohm resistance coils. This tank should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you’re using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.